10
Data exchange with higher-level controller
F process data profile
Manual – MOVISAFE
®
CS..A Safety Card (Version 2)
101
Process input data
Byte Bit Name
Valu
e
Description
0
0
STO1
0
STO is not active. Safe disconnection of the drive
is not active.
1
STO signals the status "STO active". All outputs
parameterized to STO are switched off.
1
Reserve
2
Reserve
3
Input data
valid
0
At least one of the F-DI process values sends a
substitute value.
1
All process values of the F-DI contain actual val-
ues.
4
Reserve
5
Reserve
6
Warning
0
The safety card is in error-free operation.
1
At least one warning in the safety card is active.
7
Fault status
0
The safety card is in error-free operation.
1
At least one error in the safety card is active.
1
0
F-DI00
0
F‑DI00 process value: "low" or fault.
1
F‑DI00 process value: "high".
1
F-DI01
0
F‑DI01 process value: "low" or fault.
1
F‑DI01 process value: "high".
2
F-DI02
0
F‑DI02 process value: "low" or fault.
1
F‑DI02 process value: "high".
3
F-DI03
0
F‑DI03 process value: "low" or fault.
1
F‑DI03 process value: "high".
4
Reserve
5
Reserve
6
Reserve
7
Reserve
28482271/EN – 03/2019
