10
Data exchange with higher-level controller
F process data profile
Manual – MOVISAFE
®
CS..A Safety Card (Version 2)
97
Byte Bit
Name
Value Description
4
0
SLA1
0
Activate SLA1.
1
Deactivate SLA1.
1
SLA2
0
Activate SLA2.
1
Deactivate SLA2.
2
Reserve
3
Reserve
4
Reserve
5
Reserve
6
Reserve
7
Reserve
1) SBT function is not available.
Process input data
Byte Bit
Name
Value Description
0
0
STO1
0
STO is not active. Safe disconnection is not act-
ive.
1
STO signals the status "STO active". All outputs
parameterized to STO are switched off.
1
Drive safety
function dia-
gnostics (ASF)
0
No drive safety function has determined the ex-
ceeding of a limit value.
1
At least one selected drive safety function has
determined the exceeding of a limit value or
cannot execute limit value monitoring as a con-
sequential error.
2
SBT Active
1)
0
Brake test is not active.
1
Brake test is active.
3
Input data valid
0
At least one of the F-DI process values sends a
substitute value.
1
All process values of the F-DI contain actual
values.
4
Muting
0
The encoder muting function is not active, or a
fault has occurred.
1
The encoder muting function is active.
5
Test mode act-
ive
0
Test mode for drive safety functions is not act-
ive
1
Test mode for drive safety functions is active.
6
Warning
0
The safety card is in error-free operation.
1
At least one warning in the safety card is active.
7
Fault status
0
The safety card is in error-free operation.
1
At least one error in the safety card.
28482271/EN – 03/2019
