Manual – Data Matrix Positioning System PCV80A-F200-R4-V19-SEW
25
7
Declaration of conformity
Appendix
7
Appendix
7.1
Declaration of conformity
7.2
Code cards for external parameterization
Here you find the code cards you can use for setting the parameters for some of the
basic functions of the read head step by step. Refer to chapter "External parameteriza-
tion using code cards" for a detailed description.
INFORMATION
This product has been developed and produced in accordance with applicable Euro-
pean standards and guidelines. The declaration of conformity is available for down-
load from the SEW website at (
) under "Documentation".
INFORMATION
When performing external parameterization with code cards, we recommend that you
copy and print the relevant pages of this manual and cut out the required code cards.
Doing so prevents the read head from detecting another code card on the same page
by mistake. If you use this manual directly for setting the parameters, then do not cover
unused code cards (with a sheet of paper for example).
