Manual – DFD11B DeviceNet Fieldbus Interface
11
4
Installing the DFD11B option card in MOVIDRIVE® MDX61B
Assembly and Installation
4.1.2
Basic procedure for installing and removing an option card (MDX61B, BG 1 - 6)
1. Remove the two retaining screws holding the card retaining bracket. Pull the card re-
taining bracket out evenly from the slot (do not twist!).
2. Remove the two retaining screws of the black cover plate on the card retaining brack-
et. Remove the black cover plate.
3. Position the option card onto the retaining bracket so that the three retaining screws
fit into the corresponding bores on the card retaining bracket.
4. Insert the retaining bracket with installed option card into the slot, pressing slightly so
it is seated properly. Secure the card retaining bracket with the two retaining screws.
5. To remove the option card, follow the instructions in reverse order.
60039AXX
1.
4.
4.
1.
2.
3.
3.
3.
2.
