56
Manual – MOVI-PLC® advanced DHE41B/DHF41B/DHR41B Controller
5
Configuration with the MOVITOOLS® MotionStudio PC software
Project Planning and Startup
• You can also enter the network address (the part of the IP address in which the bits
of the net mask are set) in the "Broadcast IP address" entry field when integrating the
MOVI-PLC
®
advanced
DH.41B controller in an existing network, filled up with set bits
for sending broadcast messages in the specified network. In this case, no entry is re-
quired in the field "SMLP server IP addresses".
Example:
– IP address: 10.3.71.38
– Net mask: 255.255.255.0
– Broadcast IP address: 10.3.71.255
• Perform a network scan after this. To do so, click on the "Scan" symbol in
MOVITOOLS
®
MotionStudio (see following figure).
11951AXX
0
0
I
