120
Operating Instructions – Electronic Motor DRC.-..-DAC
8
Description of command PCB parameters
Parameters
Command pcb parameters \ display values \ unit data
Unit series
The parameter indicates the unit series, for example DRC.
Unit name
index 9701.1 –
9701.5
The parameter indicates the type designation of the command PCB.
Unit signature
index 9823.1 –
9823.5
The parameter is used to indicate and enter the device signature. This parameter is
used to assign a name to the command PCB so you can identify it in the hardware tree
or in other visualization elements.
Firmware AS-
Interface option
index 9701.53,
9701.54
The parameter indicates the part number and version of the firmware used in the AS-
Interface option.
ASInterface option
index 10095.39
The parameter indicates the type of AS-Interface option:
Firmware
command level
index 9701.30,
9701.31
The parameter indicates the part number of the firmware used in the command PCB.
Deactivation of
mechanical control
elements
index 10096.30
bit 13 – 15
The parameter indicates disabled/enabled mechanical control elements.
Parameter value
Type of AS-Interface option
0
AS-Interface is not available
3
GLK30A binary slave
4
GLK31A double slave
00
I
