92
Operating Instructions – Electronic Motor DRC.-..-DAC
6
Startup with double slave GLK31A
Startup
6.9.3
Example "Fine adjustment of setpoint f2 using MOVITOOLS
®
MotionStudio"
1. It is essential that you observe the startup instructions.
2. Connect the PC to the DRC inverter.
3. Connect the DRC inverter to the voltage supply.
4. Start MOVITOOLS
®
MotionStudio.
5. Create a project and network.
6. Configure the communication channel at the PC.
7. Perform an online scan.
You will get the following or a similar result:
8. Open the context menu of the DRC command pcb [1] by clicking the right mouse
button and select the menu item "Startup" / "Parameter tree".
9. Open the folder "Setpoint selection" [3].
Deactivate switch f2 by ticking the check box "Switch f2" [4].
10.Open the folder "Setpoints" [2].
9007202012059915
[1] DRC Command pcb
[2] DRC Power section
[3] Setpoint selection folder
[4] Check box for switch f2
[4]
[3]
[1]
[2]
00
I
