Operating Instructions – MOVIDRIVE® MDR60A/61B
101
11
Characteristics
Technical Data (MDR60A1320-503-00)
11
Technical Data (MDR60A1320-503-00)
11.1 Characteristics
• Very compact size
• Supply of drive controllers
• Braking power from drive controllers is fed back into power supply system
• Rated power 160 kW
• Continuous power 200 kW
• Peak power 240 kW (motor) / 210 kW (regenerative) for 60 s
• DC link connection of several drive controllers possible
• Power section with high efficiency and operational safety
• Self synchronizing
• Overload protection in regenerative operation
• Monitoring of supply voltage, rotating field orientation and temperature
• Implementation of highly dynamic braking actions
• User-friendly startup without programming or setting
11.2 General technical data
MOVIDRIVE
®
MDR60A1320-503-00
Interference immunity
Meets EN 61000-6-1 and EN 61000-6-2
Interference emission with EMC-compli-
ant installation
Meets EN 61000-6-4 with NF300-503
Ambient temperature
ϑ
U
Ambient temperature derating
0 °C ... +40 °C
I
N
reduction: 3% I
N
per K to max. 55 °C
Climate class
EN 60721-3-3, class 3K3
Storage temperature
1)
ϑ
L
1) In case of long-term storage, the unit must be connected to the mains voltage for at least 5 minutes every
two years, otherwise the unit's service life may be reduced.
–25 °C...+55 °C (according to EN 60721-3-3, class 3K3)
Cooling type (DIN 51751)
Forced cooling
(temperature-controlled fan, response threshold 45 °C)
Degree of protection
IP20
Operating mode
Continuous duty (EN 60149-1-1 and 1-3)
Overvoltage category
III according to IEC 60664-1 (VDE 0110-1)
Pollution class
2 according to IEC 60664-1 (VDE 0110-1)
Installation altitude
h
≤
1000 m: No limitation
From 1000 m to max. 4000 m:
I
N
reduction: 0.5% per 100 m
P
i
f
kVA
Hz
n
