Operating Instructions – MOVIDRIVE® MDR60A/61B
125
16
CE marking, UL approval and C-Tick
Technical Data – Basic Unit
16
Technical Data – Basic Unit
16.1 CE marking, UL approval and C-Tick
16.1.1 CE-marking
• Low Voltage Directive
MOVIDRIVE
®
MDX60B/61B inverters and MOVIDRIVE
®
MDR60A/61B regenera-
tive power supply units comply with the regulations of the Low Voltage Directive
2006/95/EC.
• Electromagnetic compatibility (EMC)
The designated use of MOVIDRIVE
®
inverters and regenerative power supply units
is as components for installation in machinery and systems. They comply with the
EMC product standard EN 61800-3 "Variable-speed electrical drives". Provided that
you comply with the installation instructions for the SEW components, the CE mark-
ing requirements for the machine/system in which they are installed are satisfied on
the basis of the EMC directive 2004/108/EC.
• Compliance with limit classes C2 or C3 has been tested in a CE-typical drive system.
SEW-EURODRIVE can provide detailed information on request.
16.1.2 UL / cUL / GOST-R
16.1.3 C-Tick
The CE-mark on the nameplate indicates conformity with the low voltage directive 2006/
95/EC.
UL, cUL approval (USA) and the GOST-R certificate (Russia) have been granted for the
entire MOVIDRIVE
®
unit series. Only MOVIDRIVE
®
MDR60A1320-503-00 is not UL- or
cUL-approved. cUL is equivalent to CSA.
C-Tick approval has been granted for the entire MOVIDRIVE
®
range of units. C-Tick
certifies conformity with ACMA (Australian Communications and Media Authority) stan-
dards.
US
US
LISTED
LISTED
®
P
i
f
kVA
Hz
n
