120
Operating Instructions – MOVIAXIS® MX Multi-Axis Servo Inverter
5
MOVIAXIS® startup - Single-motor operation
Startup
Encoder
management
Encoder management allows you to assign the yellow-marked encoders offered in the
encoder pool to the individual parameter records or motors. If several motors are to be
operated on one axis module, you need additional multi-encoder cards (option).
• Click on the required encoder and hold the left mouse button down to drag the en-
coder to the intended parameter record. In the example above, encoder 1 is assigned
to parameter record 1.
Encoder selection
The encoder pool represents the maximum three physical MOVIAXIS encoder inputs.
Encoder 1 is the encoder input of the basic unit. Encoders 2 and 3 can be expanded with
multi-encoder cards.
• Use each encoder only once.
•
Tachometer
:
Encoders in the "Motor encoder" column are always the "Actual speed sources" and
thus tachometers.
•
Position encoder
:
Encoders in the two "Distance encoder" columns can also be used as position en-
coders.
Only one encoder can be the "Actual position source" per parameter record. For this
purpose, the "Source actual pos." checkbox must be ticked.
11799aen
Figure 75: Encoder management
0
0
I
Summary of Contents for MOVIAXIS MX
Page 2: ...SEW EURODRIVE Driving the world...
Page 210: ......
Page 211: ...SEW EURODRIVE Driving the world...
