3
Safety concept
Safety concept of Assist CS..
Manual – MOVISAFE
®
CS..A Safety Card
27
3.8
Safety concept of Assist CS..
3.8.1
Safety parameters
For all drive safety functions, MOVISAFE
®
CS.. A is equipped with setting options
through safety parameters.
The safety parameters determine the behavior of the corresponding drive safety func-
tions and are therefore safety-relevant. All safety parameters are combined in the
parameter set.
3.8.2
Test concept and test procedure
The parameters of the MOVISAFE
®
CS..A safety card are set using an engineering
PC with the "Assist CS.." parameterization tool. As the PC and the "Assist CS.." para-
meterization tool are not safety-related and therefore possibly not error-free, the safety
concept prescribes the following measures:
•
Identification of the MOVISAFE
®
CS..A.
•
The ID of the safety key must be entered via a dialog when establishing a connec-
tion with the MOVISAFE
®
CS..A safety card.
•
Guided parameter setting procedure with the parameterization tool "Assist CS.."
with integrated safety features such as plausibility check of entries. The user must
compare the entered parameters with the device parameters and confirm (verify)
them.
•
Completion of the parameterization by verification of parameters, assisted by the
parameterization tool "Assist CS.." with subsequent creation of an acceptance pro-
tocol for validation of the safety functions.
24842532/EN – 04/2018
