14
Manual – MOVIDRIVE® MDX61B Synchronous Operation Board DRS11B
4
Installing the DRS11B option card
Assembly and installation instructions
Installation and
removal of an
option card
1. Remove the retaining screws holding the card retaining bracket. Pull the card retain-
ing bracket out evenly from the slot (do not twist!).
2. Remove the retaining screws of the black cover plate on the card retaining bracket.
Remove the black cover plate.
3. Position the option card onto the retaining bracket so that the retaining screws fit into
the corresponding bores on the card retaining bracket.
4. Insert the retaining bracket with installed option card into the slot, pressing slightly so
it is seated properly. Secure the card retaining bracket with the retaining screws.
5. To remove the option card, follow the instructions in reverse order.
53001AXX
Figure 2: Installing an option card in MOVIDRIVE
®
MDX61B sizes 1 to 6
1.
3.
4.
2.
