Operating Instructions – MOVIFIT® FDC
9
2
Transportation and storage
Safety Notes
2.6
Transportation and storage
Observe the notes on transportation, storage and proper handling. Observe the climatic
conditions as stated in the "Technical Data" sections. Do not attach any additional loads.
Use suitable, sufficiently rated handling equipment (e.g. rope guides) if required.
2.7
Installation
The units must be installed and cooled according to the regulations and specifications
in the corresponding documentation.
Protect MOVIFIT
®
FDC and the MOVIGEAR
®
and DRC drive units from improper strain.
The following applications are prohibited unless explicitly permitted:
• Use in potentially explosive atmospheres.
• Use in areas exposed to harmful oils, acids, gases, vapors, dust, radiation, etc.
• Use in non-stationary applications with strong mechanical oscillation and impact
loads; see chapter "Technical Data".
2.8
Electrical connection
Observe applicable national accident prevention guidelines (e.g. BGV A3) when working
on a live MOVIFIT
®
FDC unit.
Perform electrical installation according to the pertinent regulations (e.g. cable cross
sections, fusing, protective conductor connection). For any additional information, refer
to the applicable documentation.
You find notes on EMC-compliant installation, such as shielding, grounding, arrange-
ment of filters, and routing of lines in the documentation for MOVIFIT
®
FDC and the
MOVIGEAR
®
and DRC drive units. The manufacturer of the system or machine is
responsible for maintaining the limits established by EMC legislation.
Protective measures and protection devices must comply with the regulations in force
(e.g. EN 60204-1 or EN 61800-5-1).
2.9
Safe disconnection
MOVIFIT
®
FDC and the MOVIGEAR
®
and DRC drive units meet all requirements for
safe disconnection of power and electronics connections in accordance with EN 61800-
5-1. All connected circuits must also satisfy the requirements for safe disconnection to
ensure reliable isolation.
Summary of Contents for MOVIFIT FDC
Page 2: ...SEW EURODRIVE Driving the world...
Page 137: ...Operating Instructions MOVIFIT FDC 137 Index Y Y adapter 77 0 9 24 V terminals connection 55...
Page 138: ......
Page 139: ......
