10
Declaration of Conformity
Operating Instructions – MOVIFIT
®
MC
163
EC Declaration of Conformity
Bruchsal
Johann
Soder
Place
Date
Managing Director Technology
a) b)
a) Authorized representative for issuing this declaration on behalf of the manufacturer
b) Authorized representative for compiling the technical documents
902070013
11.07.13
SEW-EURODRIVE GmbH & Co KG
Ernst-Blickle-Straße 42, D-76646 Bruchsal
declares under sole responsibility that the
units of the series
MOVIFIT
®
FC
MOVIFIT
®
MC
in connection with
S12A / S12B
Drive Safety Option
are in conformity with
Machinery Directive
2006/42/EC
1)
Low Voltage Directive
2006/95/EC
EMC Directive
2004/108/EC
4)
Applied harmonized standards:
EN ISO 13849-1:2008
5)
EN 61800-5-2:2007
EN 61800-5-1:2007
EN 61800-3:2007 + A1:2012
1)
The products are intended for installation in machines. Startup is prohibited until it has been
established that the machinery into which these products are to be incorporated complies with the
provisions of the aforementioned Machinery Directive.
4)
According to the EMC Directive, the listed products are not independently operable products. EMC
assessment is only possible after these products have been integrated in an overall system. The
assessment was verified for a typical system constellation, but not for the individual product.
5)
All safety-relevant requirements of the product-specific documentation (operating instructions,
manual, etc.) must be met over the entire product life cycle.
19484828/EN – 01/2015
