6
Startup
Requirements
Operating Instructions – MOVIFIT
®
MC
113
INFORMATION
To ensure fault-free operation, do not disconnect or connect the signal cables during
operation.
6.2
Requirements
The following conditions apply to startup:
• MOVIFIT
®
and the drive units must be installed correctly both mechanically and
electrically.
• Appropriate safety measures prevent the drives from starting up unintentionally.
• Appropriate safety measures must be taken to prevent risk of injury or damage to
the machine.
The following hardware is required for startup:
• PC or laptop
• Interface adapter
• Connection cable between PC and MOVIFIT
®
The following software is required on the PC or laptop for startup:
• MOVITOOLS
®
MotionStudio, version 5.60 or later
19484828/EN – 01/2015
