3
Unit structure
MOVIFIT® MC type designation
Operating Instructions – MOVIFIT
®
MC
21
ABOX type designation
The following table shows an example of the type designation of the MOVIFIT
®
ABOX
MTA11A
‑
503
‑
S011
‑
M01
‑
00/M11
:
MT
Unit series
MT = MOVIFIT
®
A
Device type
A = ABOX (connection box)
11
Series
11 = Standard (IP65)
A
Version A
-
50
Connection voltage
50 = AC 380 – 500 V
3
Connection type
3 = 3-phase
-
S01
Connection configura-
tion
S01 = Standard ABOX with terminals and cable bushings
S41 = Hybrid ABOX with M12 for I/Os
S51 = Hybrid ABOX with M12 for I/Os + bus
S61 = Hybrid ABOX with M12 for I/Os, push
‑
pull RJ45 for bus
I51 =
Hybrid ABOX with circular connector (Intercontec),
3x MOVIMOT
®
downward output,
M12 for I/Os + bus
G51 = Hybrid ABOX with circular connector (Intercontec),
3x MOVIMOT
®
forward output,
M12 for I/Os + bus
I61 =
Hybrid ABOX with circular connector (Intercontec),
3x MOVIMOT
®
downward output,
M12 for I/Os, push-pull RJ45 for bus
G61 = Hybrid ABOX with circular connector (Intercontec),
3x MOVIMOT
®
forward output,
M12 for I/Os, push-pull RJ45 for bus
1
Fieldbus
1 = PROFIBUS
2 = DeviceNet™
3 = EtherNet/IP™, PROFINET IO, Modbus/TCP
-
M01
Maintenance switch
M01 = Load disconnector and line protection up to 12 A
1)
M14 = Load disconnector and line protection up to 9 A
2)
M15 = Load disconnector and line protection up to 12 A
2)
-
00
ABOX design
00 = Series
/
19484828/EN – 01/2015
