4
Mechanical installation
General information
Operating Instructions – MOVIFIT
®
MC
23
4
Mechanical installation
4.1
General information
CAUTION
Risk of injury due to protruding parts, especially the mounting rail.
Risk of cutting or crushing.
• Cover sharp and protruding parts, especially the mounting rail, to protect against
injury and damage.
• MOVIFIT
®
may only be installed by qualified personnel.
Observe the following notes on mechanical installation:
• Observe the general safety notes.
• Only install MOVIFIT
®
on a level, low-vibration, and torsionally rigid support struc-
ture, see "Mounting position" chapter.
• Strictly observe all instructions referring to the technical data and the permissible
conditions regarding the place of installation.
• Use only the provided attachment options when mounting the unit.
• When selecting and dimensioning the mounting and safety elements, observe the
applicable standards, the technical data of the unit, and the local circumstances.
• Use suitable screw fittings for the cables (use reducing adapters if necessary). Use
suitable mating connectors with plug connector variants.
• Close all unused cable entries with suitable closing plugs.
• Cover the unused plug connectors with blind caps.
4.2
Tools required
• Set of wrenches
• Socket wrench, SW8 mm
• Torque wrench
• Screwdriver set
19484828/EN – 01/2015
