5
Electrical installation
Standard ABOX "MTA...-S01.-...-00"
Operating Instructions – MOVIFIT
®
MC
51
Enabling the terminals
Terminals X1, X20
Connecting conductors
without a screwdriver
1)
Connecting conductors
with a screwdriver
2)
812406283
2.
1.
812407947
1) Single-wire conductors and flexible conductors with conductor end sleeves can be installed directly
(without using a tool) up to 2 cross section sizes below the rated cross section.
2) Untreated, flexible conductors or conductors with small cross sections cannot be directly inserted into
the terminal. To open the clamping spring when you want to connect such conductors, push a screwdriver
firmly into the actuation opening.
Terminals X7, X71, X8, X81, X9, X91, X29, X45, X25, X30, X31, X35
1)
2.
1.
3.
812404619
1) With these terminals, you must always connect the conductor with a screwdriver irrespective of the con-
ductor type.
19484828/EN – 01/2015
