5
Electrical installation
Electrical connections
Operating Instructions – MOVIFIT
®
MC
93
5.11.9
X11, X12: Ethernet interface
The following table shows information about this connection:
Function
• PROFINET IO interface
• EtherNet/IP™ interface
• Modbus/TCP interface
Connection type
Push-pull RJ45
Wiring diagram
1
8
9007201609174667
Assignment
No.
Name
Function
1
TX+
Transmit line (+)
2
TX-
Transmit line (-)
3
RX+
Receive line (+)
4
res.
Reserved
5
res.
Reserved
6
RX-
Receive line (-)
7
res.
Reserved
8
res.
Reserved
Connection cable
NOTICE
The RJ45 socket can be damaged by inserting commercially available RJ45 patch
cables without push-pull connector housing.
Damage to the RJ45 socket.
• Only plug suitable push-pull RJ45 mating connectors according to
IEC 61076
‑
3
‑
117 into push-pull RJ45 sockets.
• Never use commercially available RJ45 patch cables without push-pull connector
housing. These plug connectors do not snap in place when they are plugged.
They may damage the socket and are therefore not suited.
Use only shielded cables for this connection.
19484828/EN – 01/2015
