2
MOVITRAC
®
31.. – FRS 31
General Information
This manual contains all specific technical data and operating instructions for the FRS 31 Synchro-
nous Operation Control package.
Apart from that, the general information about the MOVITRAC
®
31 series applies as included in the
MOVITRAC
®
31 Operating Instructions.
Each unit is manufactured and tested to current SEW-EURODRIVE technical standards and specifi-
cations. The manufacturer reserves the right to make changes to the technical data and designs,
which are in the interest of technical progress.
A requirement of fault-free operation and fulfilment of any rights to claim under guarantee is that
these instructions and notes are followed.
This manual contain important information for servicing and should be kept near the unit.
•
This manual does not replace the detailed MOVITRAC
®
31 Operating Instructions!
•
Equipment may only be installed by qualified electrical personnel in compliance with the
applicable accident prevention regulations and the operating instructions!
•
When the unit’s protective cover is removed, the MOVITRAC
®
31 unit has enclosure IP 00.
Dangerous voltages are present on some parts.
In normal operation the unit must be closed with the protective cover properly mounted!
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
