144
Operating Instructions – MOVITRAC® B
8
Technical data of the basic unit
Technical data
8
Technical data
8.1
Technical data of the basic unit
8.1.1
CE marking, UL approval and C-Tick
CE marking
MOVITRAC
®
B frequency inverters comply with the regulations of the Low Voltage
Directive 2006/95/EC.
MOVITRAC
®
B frequency inverters are designed for use as components for installation
in machines and systems. They comply with the EMC product standard EN 61800-3
Variable-speed electrical drives
. Provided the installation instructions are complied with,
they satisfy the relevant requirements for the CE marking for the entire machine/system
in which they are installed, on the basis of the EMC Directive 2004/108/EC. For detailed
information on EMC compliant installation, refer to the publication "Electromagnetic
Compatibility in Drive Engineering" from SEW-EURODRIVE.
Compliance with limit classes C2 and C1 has been tested on a specified test setup.
SEW-EURODRIVE can provide detailed information on request.
The CE-mark on the nameplate indicates conformity with the low voltage directive
2006/95/EC. SEW-EURODRIVE can issue a declaration of conformity to this effect on
request.
UL approval / CSA / GOST-R certificate / C-Tick
UL and cUL approval (USA) has been granted for the following MOVITRAC
®
B units:
• 230 V / 1-phase
• 230 V / 3-phase
• 400/500 V / 3-phase
cUL is equivalent to CSA approval.
The GOST-R certificate (Russia) was granted for the MOVITRAC
®
B series.
C-Tick certifies conformity with ACMA (Australian Communications and Media Author-
ity) standards.
The units 1 × 230 V and 3 × 400 V have the C-Tick.
US
US
LISTED
LISTED
®
P
i
f
kVA
Hz
n
Summary of Contents for Movitrac B
Page 2: ...SEW EURODRIVE Driving the world...
Page 259: ......
