Operating Instructions – MOVITRAC® B
189
8
Technical data for accessories and options
Technical data
DFS11B fieldbus interface for PROFIBUS / PROFIsafe
®
Part number: 1821 183 6
1823 863 7 as a kit with suitable screws.
Description
With the powerful, universal fieldbus interface option DFS11B, the MOVITRAC
®
B fre-
quency inverter can be connected to higher-level automation systems via PROFIBUS
and PROFIsafe.
Refer to the publication "DFS11B PROFIBUS DP-V1 with PROFIsafe fieldbus interface"
for installation.
Electronics data
•
NOTICE
Safety-related applications are implemented using PROFIsafe interfaces.
Refer to the publication "DFS11B PROFIBUS DP-V1 with PROFIsafe Fieldbus Inter-
face".
DFS11B option
External voltage
supply via X26
U = DC 24 V (–15%, +20%)
I
max
= DC 200 mA
P
max
= 3.4 W
PROFIBUS proto-
col variants
PROFIBUS DP and DP-V1 according to IEC 61158
Automatic baud
rate detection
9.6 kBd – 12 MBd
Connection tech-
nology
•
Via 9-pin D-sub connector
•
Pin assignment according to IEC 61158
Bus termination
Not integrated, must be implemented using suitable PROFIBUS
connector with terminating resistors that can be switched on.
Station address
1 – 125, can be set via DIP switches
F address
1 – 1022, can be set via DIP switches
GSD file name
SEW_6009.GSD
DP ID number
6009
hex
= 24585
dec
Application-spe-
cific parameter-
setting data
(Set-Prm-User-
Data)
•
Length: 3 bytes
•
Hex parameter setting 00,00,00
DP configura-
tions for
DDLM_Chk_Cfg
See publication "DFS11B PROFIBUS DP-V1 with PROFIsafe
Fieldbus Interface".
Diagnostics data
Standard diagnostics: 6 bytes
P
i
f
kVA
Hz
n
Summary of Contents for Movitrac B
Page 2: ...SEW EURODRIVE Driving the world...
Page 259: ......
