-10 -
8. MAINTENANCE
Battery replacement
When the low battery warning symbol appears,
replace with new batteries as follows
(1) Disconnect the test leads from the instrument and
turn off the power.
(2) Unscrew the battery cover and replace with new
batteries.
(3) Close the battery cover and screw.
Cleaning and Storage
Periodically wipe the case with a damp cloth and
detergent. Do not use abrasives or solvents.
If the meter is not used for over 60 days, remove the
batteries for storage.
WARNING
To avoid electrical shock or damage to the meter,
do not get water inside the case.
Due to our policy of constant improvement and development, we reserve
the right to change specifications without notice.
-11 -
CAT
- Is for measurements performed at the
source of the low voltage installation.
CAT
- Is for measurements performed in the
building installation.
CAT
- Is for measurement performed on circuits
directly connected to the low voltage
installation.
CAT
- Is for measurements performed on circuits
not directly Connected to Mains.
Batteries
Screw
