36
│ 3 Using the system
Note:
When the receiver is switched off, the measurement value selec
-
tion is totally cleared. Measurements that have not been saved
are deleted.
3.7.2
Playing back noise
Note:
If the radio connection between the receiver and headphones is
interrupted, noise cannot be played back.
●
Tap
Back
to switch from the audio player to the main view.
Then open the audio player again.
You can play back a noise in the following ways:
● With recorded filter limits
● With current filter limits
●
Faster than recorded
Note:
You cannot adjust the volume during playback of a recorded
noise.
3.7.2.1
Playing back noise with recorded filter limits
The filter limits set during a measurement are automatically re
-
corded too. The noise can be played back after the measurement
with these recorded filter limits.
The
Audio player 1/2
menu is open.
●
Tap the measurement you want to play back in the measure-
ment value selection. The noise will be played back with the
recorded filter settings.
