60
│ 5 Maintenance
5.2.2
Removing the batteries from the A 200 receiver
NOTICE! Risk of damage
There are parts in the battery compartment of the receiver which
can be damaged mechanically or by electrostatic discharge when
removing the batteries.
●
Always read section 5.2 and section 5.2.1 before removing
the batteries.
●
Avoid electrostatic discharges at all costs, e.g. by using an
ESD workstation.
Fig. 32: Back of the A 200 receiver
White circles: Screws of the battery compartment cover
The batteries are in the battery compartment. The battery com-
partment is sealed with the battery compartment cover.
The receiver must be switched off.
1. Undo the four screws securing the battery compartment cov-
er.
2.
Lift off the battery compartment cover with extreme care.
