8
3 Operation
The instrument enters the pre-set test mode
.
Note:
The test mode to be enabled immediately after the
start-up can be changed in the extended settings
(see section 3.2). As default, the mode
Test of
working order
is set.
The following display data depend on the testing mode.
Test of working order
Measuring range
Indication of the test mode,
including information on the sen-
sors’ measurement range
Parameters
Indication of the measuring
specifications, corresponding to
the selected test mode
Measuring data
Indication of measurement val-
ues
Working order
0...10 l/h
0..200 mbar
WO < 1.0 l/h
LWO
5.0 l/h
<
NWO
5.0 l/h
≥
<
≥
W
CH4
0.0
I
l/h
0.0 mbar
