28
3 Operation
Adjustment
System
Hardware
Parameter
Memory
Exit
Note:
If the PIN code is set to 0000, no PIN code query
is carried out. The extended settings will then be
freely accessible.
If you cannot call up the extended settings (e. g.,
you have forgotten the PIN code), it is required to
contact the SEWERIN service.
The PIN code has to be entered from left to right. The currently
active digit is always indicated on a black background:
z
Select the desired digit with the help of the or key.
z
Confirm the selection with the
key.
z
Enter all digits of your code.
If the PIN code was entered correctly, the
Info menu
will appear
after confirming the last digit:
Otherwise the instrument returns to the measuring mode.
