3
2 General
2.2
Intended use
The
SePem 01 GSM
logger is used for the acquisition of mea-
surement data. The system is designed for use in stationary
monitoring applications for water pipe networks It must only be
operated by suitably qualified employees (skilled staff, specialists
and technicians) of water supply companies. The logger must only
be installed in shafts and underground hydrants.
The
SePem 01 GSM Interface
is used for programming the log-
ger. The device must only be operated using the cables supplied
(USB cable, connector cable).
All applicable safety and accident prevention regulations must
be complied with when operating the
SePem 01 GSM
and
SePem 01 GSM Interface
.
Specific details of the operating conditions applicable to the op
-
eration of the
SePem 01 GSM
and
SePem 01 GSM Interface
at the measurement location are provided in the appendix (Sec-
tion 9.1)
The
SePem 01 GSM
and
SePem 01 GSM Interface
have been
manufactured in accordance with all statutory legal and safety
regulations. All components used correspond to the state-of-the-
art and conform to EC requirements. The devices are safe to op
-
erate when used in accordance with the instructions provided.
