10
6 Preparing the GSM Logger for use
6
Preparing the GSM Logger for use
6.1
Inserting the SIM card
Every
GSM Logger
must be fitted with a SIM card before it is used
for the first time (not included with the device; see Section 3.1 for
requirements). The SIM card is necessary to identify the Logger
in the GSM network.
A Torx head screw driver is required for inserting the SIM card
(accessory).
Unscrew the cover.
Slide the SIM card into the slot, as shown in Fig. 5.
Fig. 5: Slide in the SIM card
Use a tool (e.g. screw driver) to push the SIM card down until
it locks into place.
Screw the cover back into place, being careful to ensure that
the seal is correctly positioned and does not get squashed.
Tighten the screws firmly.
