14
7 Installing the GSM Logger at the measurement
7.3
Attaching the magnet and aerial to the GSM Logger
There are several possible configurations for attaching magnets
and aerials to the housing. Local conditions at the measurement
location must always be taken into consideration when selecting
a particular type of attachment.
Note:
The method used to attach the magnet and aerial,
and their exact positioning, have an influence on the
sensitivity with which measurement data can be re-
corded and the quality of the network connection.
7.3.1
Magnet
The magnet can be screwed to the housing at the following points
(dependent on fittings supplied):
Thread on the side opposite the aerial connector.
Retaining nut in the guide rail
Fig. 7: Mounting points on the housing for attaching the magnet
