2
2 General
2
General
2.1
Warranty
The following instructions must be complied with in order for any
warranty to be applicable in respect of the functionality and safe
operation of this equipment.
Hermann Sewerin GmbH cannot be held responsible for any dam-
ages resulting from non-compliance with these instructions. The
warranty and liability provisions of the terms of sale and delivery
of Hermann Sewerin GmbH are not affected by the information
given below.
The product must only be operated after the relevant operating
instructions have been read and understood.
The product must only be used for its intended purpose.
The product is only suitable for use in industrial and commer
-
cial applications.
Repairs must only be carried out by a specialist technician or
by other suitably trained personnel.
Changes or modifications to this product must not be carried out
without approval from Hermann Sewerin GmbH. The manufac
-
turer cannot be held responsible for damages if non-approved
modifications have been made.
Only accessories supplied by Hermann Sewerin GmbH may
be used with this product.
All repairs must be carried out using replacement parts that
have been approved by Hermann Sewerin GmbH.
Only approved aerials may be used.
The manufacturer reserves the right to make technical modifi
-
cations in the course of further development.
Generally applicable safety and accident-prevention regulations
must be complied with, in addition to the information provided in
this manual.
