37
5 SePem 01 Master
5.5.3.4 Single logger
Note:
A radio connection must always be established between the
Mas-
ter
and
logger
when working with single loggers.
The
Master will switch to receive mode
as soon as the
Single
logger
menu option is chosen (selected and confirmed). The
LOGGER SELECTION
options will appear. A selection window will
be displayed (initially blank).
1. Establish radio connection to the required logger by:
−
Activating the logger with a magnet
OR
−
Moving the
Master
within the transmission range of the
logger (requires the radio time frame to be open).
2. Ensure that the
Master
and logger are approx. 1 – 2 m apart.
3. Wait a moment. When the internal logger search has been
completed a list will be displayed in the selection window
showing up to four loggers detected to which there is a radio
connection. (These are loggers with an open radio time frame /
manually activated loggers.)
LOGGER SELECTION
10:21
100 02 01363
SERIAL
Back
Signal
100 02 01883
100 02 01888
100 02 01894
Fig. 12: Logger selection for single loggers
4.
Choose the required logger (select and confirm).