Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
61
FlexWATCH™ server.
Note
AOIP is proprietary data service run by FlexWATCH™ or its business partners around the
world. Thus, depending on the country AOIP service can run by your local vendor or
master distributor or in some case, you need to user AOIP server run by manufacturer.
More detailed information about how to use can be acquired by contact your local
distributor or
sales@flexwatch.com
.
6.2
AOIP configuration
As described above, once you register product in the AOIP server and Network setting is
correctly done to user AOIP function, you need to configure AOIP function in the
FlexWATCH
TM
server.
1)
Check the “
Enable
” option to use AOIP function
2)
Type in AOIP server address. Either Domain name or IP address can be typed in.
3)
Select whether to use HTTP or NVCP-TX port. HTTP port must be selected to view
AOIP Server IP
:
AOIP server IP is subject to change depending on where you are and who is your local
distributor, since AOIP server can be run by local distributor in some countries. If there is
no local AOIP service available, you can contact manufacturer to use.
www.aoip.co.kr
is
AOIP Service address run by manufacturer.
HTTP Port
:
This is enable HTTP connects to AOIP server. You must select “Enable” option.
NVCP-TX Port
:
NVCP-Tx Port should be enabled only when video is transmitter to NDVR server such as
FW-5440 and FW-5000, or Video proxy server supplied by FlexWATCH
TM
server. If not, do
