FW3150 User’s Manual Part 1
4031
Seyeon Tech Co., Ltd
8
2. Hardware Description
2.1. FW-3150 Front Panel View
Picture 2 : FW-3150 Front Panel
A B C D E F G
Name
Description
A Power
Power input ports for DC 12V 0.8A [SMPS].
Use the original power supply unit from the package.
B
Grounding Connector
Grounding Connector
C
Factory Default
Button
This button can reset the factory default settings at the system.
Especially when a user lost his/her admin-password, or when it got
any uncertain faulty operation.
- After reboot the system, wait until hearing two times of beep sound.
- Keep pressing FD button for 5~10 seconds until hearing three times
short beep sound. ACT LED blinks during the process. The system
will reboot automatically when it’s completed.
D
LAN
LAN Port for 10/100M Base T Auto sensing.
E COM
RS-232 ports for Serial input device, Modem or
Console (Hyperterminal.connection).
F
POWER LED
Red light blinks when power is provided.
G LAN(Tx/Rx)
LED
Green light blinks when there is data transmission on the connected
LAN.
Table 3 : FW-3150 Front Panel Description
