6
7
ENGLISH
ENGLISH
5. FITTING THE CABLE INSIDE THE POLARTEC SWEATER
The SF Tech Polartec sweater is made to receive the cable of the heating gloves system. If the system is used with
another type of clothing, this steps can be ignored.
1. Locate the oppening on the lower left part of the
sweater.
2. The cables for the gloves have different length.
The longest cable is connected to the right arm
whereas the shortest is to the left arm.
3. Thread the connector for the glove through the
hole of the sweater.
4. Push the cable through the lining of the garment.
5. Thread the cable up to the sleeve
6. On the wrist, take the cable out through the
opening provided for this purpose.
7. Repeat with the other arm.
8. Thread the excess cable into the suit so that you
only have the necessary amount outside the
garment.
