4
5
ENGLISH
ENGLISH
3. CONFIGURATIONS
BATTERIES
HEATHING VALVE
HEATHING SPLITTTER
HEATHING PADS
POLARTEC SWEATER
POLARTEC VEST
HEATHING GLOVES
4. HEATING PADS
The SF Tech heating system is based on a modular principle that makes it easy to remove or replace heating
elements. This system uses heated pads made of breathable fabric that are connected to each other through an
electrical wiring. The modular system makes it possible to replace pads or wire, quickly and without having to
change the undergarment.
The heating elements have a physical dimension of 33x16cm (13”x6.3”) and provide a maximum power of 10W
each, or a total of 40W for the four elements. Each elements is designed to be fitted in an internal pouch of the
SF Tech sweater or the SF Tech vest. The pads are held in place by a velcro fastener and can be easily removed if
necessary. The main distribution cable goes through the lining of the undergarment.
The pads are connected to the main distribution cable by a small waterproof connector. For maximum flexibility
and strength, the insulation of the electrical wires is made of silicone and the cables are covered with a nylon
braided protective sheath. The connection with the heating valve is made using a waterproof push lock connector,
to facilitate connection while gearing up and ensuring a stable connection during the dive..
WARNINGS
Do not fold or bend.
Do not immerse.
TECHNICAL DATA
Maximum operating voltage
12V
Size (each pad)
33cm x 16cm
Maximum power (each pad)
10W @ 12V
Maximum power (4 pads)
40W @ 12V
Maximum operating current
3.3A @ 12V
