10
11
ENGLISH
ENGLISH
6.13 ...in order to have the excess cable outside of the
lining.
6.14 From each pocket, locate the corresponding
connector and take it out through the provided
opening.
6.15 Repeat for each pocket.
6.16 Leave the connectors outside of the pockets.
7. PADS SETUP INSIDE THE POLARTEC SWEATER
7.1 The pads have two distinct sides. The smooth part
should be on the outside of the garment.
In the picture above, the pads are upside down.
7.2 The breathing part with the mesh should be close
to the skin.
The picture above illustrates the correct way to
put the pads.
7.3 Slip on the pad inside the pocket, making sure
that the pad does not catch on the velcro closing
the pocket.
7.4 By putting the arm into the pocket, fully insert
the pad.
