12
13
ENGLISH
ENGLISH
7.5 Verify that the velcro of the pad is well attached
to the inside velcro of the pocket. The pad must
not be bent or folded.
7.6 Connect the pad to the main cable.
7.7 Put the excess cable inside the pocket.
7.8 Repeat for all the pads.
8. WIRING OF THE CABLE INSIDE THE VEST
8.1 The SF Tech vest is made to receive the cable of
the heating system.
8.2 Open the jacket and lay if flat.
8.3 Lay the cable on the vest as shown on the picture
above. If necessary, number the connectors.
8.4 Thread the main connector inside the opening of
pocket #4.
#4
#3
#2
#1
