✓
integrated boot loader for the Strato Pi micro-controller, allowing in-field firmware
upgrades directly from the Raspberry Pi
✓
embedded Microchip ATECC608A secure element chip
✓
on-board LEDs for power supply and serial line activity
✓
power supply and serial connections on a screw terminal block
✓
integrated uninterruptible power supply, with external lead-acid 12V battery
✓
2.2A resettable fuse on battery input
✓
auxiliary power supply output voltage, to power external devices through Strato Pi UPS
✓
simple UPS status and control via the GPIO pins of the Raspberry Pi board
✓
on-board LED for battery operations status.
With Iono Pi board:
✓
9÷28Vdc power supply, with surge and reverse polarity protection, and 2.2A resettable
fuse
✓
4 power relay outputs rated for 6A at 250V
✓
2 analog voltage inputs 0÷30V
✓
2 analog voltage inputs 0÷3V on internal pin-headers
✓
7 configurable digital input/output pins, for potential-free or voltage inputs, TLL input/
ouptuts and open collector outputs
✓
1-Wire and Wiegand support
✓
real time clock with replaceable CR1025 Lithium / Manganese Dioxide back-up battery
✓
embedded Microchip ATECC608A secure element chip
✓
2 on-board LEDs, one for power supply and one controlled by a Pi’s GPIO line
✓
power supply and I/O connections on a screw terminal block.
9
User Guide
Summary of Contents for Iono Pi Touch
Page 15: ...Dimensions 14 User Guide...
