Features
The Iono RP D16 key features are:
✓
12÷28
Vdc power supply, with surge and reverse polarity protection, and 1.1
A
resettable fuse
✓
RP2040, dual-core Arm Cortex M0+ processor, clocked up to 133 MHz, 264
KB of
SRAM
✓
16
MB on-board Flash memory
✓
16 isolated digital input/output lines, with dedicated power supply inputs
✓
current-sinking 24
V IEC 61131-2 compliant industrial digital inputs with diagnostics,
based on MAX22190
✓
640
mA, 24
V outputs that can be configured as high-side switches or push-pull drivers
for high-speed switching, based on MAX14912/MAX14913
✓
four 5
V level digital input/output lines
✓
standard RS-485 interface to the RP2040 UART serial pins, with electrostatic discharge
protection
✓
1-Wire, I2C and Wiegand support
✓
auxiliary 5
V and supply voltage outputs, with overcurrent protection
✓
optional real time clock with on-board Lithium / Manganese Dioxide back-up battery
✓
optional secure element chip
✓
optional earthquake sensor module
✓
removable terminal blocks for easier installation
✓
inputs protected against electrostatic discharges and temporary over voltages
✓
compact, standard modular housing 3 units size, suitable for mounting on Omega rail.
8
Iono RP D16 User Guide
