S
GEnE.
GEnE.
Output value
if
Enter the value
to be injected
M
M
Press Menu to
revert to
measure
display
Note
: The instrument carries on measuring during simulation. Only the
analog output no longer reacts to the measure.
CLEAr
4.10.3 Menu
: Deleting of recorded alarms
If the function recording of alarms has been programmed :
The relay state is recorded after a setpoint has been passed.
If the setpoint is passed back the other way, the relay state does not
change and the corresponding led starts to blink.
To come back to the normal state (led not blinking and relay in the cor-
rect state) use menu CLEAr).
M
M
CLEAr
recorded alarms are not
deleted
delete recorded alarms and revert to
measure display
Reminder :
If no key is pressed during 20 s., the instrument
will automatically revert to measure display.
Note
: An exit from mode programming with configuration saving will
reset the alarm recordings to zero.
(accessible according to programmed access
code and if option analog output)
4.10.2 Simulation of the analog output
5.1 FFunctions w
which rrequire ppressing oonly 11 kkey :
a / min. value display
b/ max. value display
InF.
02.00
Measure
display
Alternate infor-
mation display
Minimum value
55.. FFU
UN
NC
CT
TIIO
ON
NS
S D
DIIR
RE
EC
CT
T FFR
RO
OM
M D
DIIS
SP
PLLA
AY
Y
SUP.
08.00
Measure
display
Alternate infor-
mation display
Maximum value
c / Display switching
(3 possible parameters)
A long pressing (>3 s) on or allows passing on to next or pre-
vious parameter (a led indicates which parameter is selected).
d / Deleting of maximum and minimum values
1 min. and 1 max. available for each displayed parameter
M
M
The instrument reverts to measure display.
Reminder :
If no key is pressed during 20 s., the instrument will revert
to measure display.
Note :
An exit from mode programming with configuration saving
will reset the min. and max. values to zero.
CLr.M
Measure
display
deleting of recorded min. and max., and revert
to measure display
