© 1998 SGC Inc
12
6.2.3 MOBILE MOUNTING OPTIONS
Velcro mobile mounts (option 05-42) with peel-off adhesive are
supplied (to be installed by the operator). When using the velcro
mount, we recommend the use of a secure cable, which should be
attached between the radio chassis (or mounting plate) and the
vehicle for added safety. For a more secure and versatile installa-
tion, an optional pedestal mount system is also available from your
dealer.
Note: SGC assumes no liability for damage or injury which could occur in the
event of an accident or collision.
7.0 SG-2020 APPLICATIONS
7.1.
HAM GEAR VOICE
The SG-2020 is a multi-purpose ham radio, ideally suited for base,
mobile, or portable use. Because of its unique characteristics, it
will out perform many of its more expensive competitors in the
market place.
Low current consumption, both in receive and transmit allows this
equipment to operate when others will not. In addition, it can be
operated by simple “D” size drycell batteries. Its transmit charac-
teristics with 20W output and adequate speech compression, allows
“on air” performance to be perceived as a 100W transceiver. The
simple but effective settings capability from the RF gain, pass band
tuning, and audio frequency band width allows the unit to operate
efficiently in any severe communication environment. This, com-
bined with low intermodulation of + 18 dbm and the frequency
scanning feature, make this low cost transceiver ideal as a base sta-
tion monitor.
The SG-2020 HF radio is unique as a portable product on the glob-
al market, because its outstanding performance, small size, quality,
and multi application capability.
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: 425-746-6384 or 746-7173 Tel: 425- 746-6310 or 1-800-259 7331
E-mail: sgc@sgcworld.com Web site: http://www.sgcworld.com
Summary of Contents for SG-2020 TEST DOCUMENT
