23
© 1998 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: 425-746-6384 or 746-7173 Tel: 425- 746-6310 or 1-800-259 7331
E-mail: sgc@sgcworld.com Web site: http://www.sgcworld.com
Blanking: ‘b’ is displayed (Press MEM to enter).
FREQUENCY STEP: .1, .5, 1.0, or 2.5 kHz.
FREQ Step: ‘F’ is displayed (Press MEM to enter).
9.7
ADJUST ‘FAST’ INCREMENTAL VALUE (CMD + FAST)
While pressing CMD and FAST simultaneously, but momentarily,
turn main tuning knob to adjust the incremental value by .1, .5, 1.0,
or 10 kHz. To store this value into memory, press MEM.
9.8
C A L I B R ATE FREQUENCY DISPLAY (CMD +
"XCVE")
To calibrate the frequency display, press CMD and "XCVE" simul-
t a n e o u s l y, but momentarily. All three mode LED’s
("XCVE",RIT,SPLIT) will be on. Adjust by turning the main tun-
ing knob. To store this calibration, press MEM.
Note: If the frequency display has been re-calibrated, the default
channel memory frequencies will be offset by the same corrected
value. If an adjustment has been made, it may be necessary to re-
enter the frequency into the 20 memories.
10.0 POWER - ON OPTIONS
1 0 . 1 “CMD” BUTTO N
Note: Holding the “CMD” button upon power up will cause the
LCD to display “C”. This has no user function and is for factory
use only. The sequence will abort to normal radio operation about a
second after the “CMD” button is released.
1 0 . 2 R E S TORE FA C TO RY MEMORY DEFA U LTS (MEM)
To restore factory memory defaults, hold MEM upon powering up
of unit.
1 0 . 3 BACKLIGHT DEFA U LT ON / OFF and LED Te s t
Power up the radio while depressing the ‘LIGHT’ button. Hold it
until either ‘dl ON’ or ‘dl OFF’ is displayed. Select whether you
Summary of Contents for SG-2020 TEST DOCUMENT
