16
Pan / Tilt positions
To edit and store any of the 9 internal pan/tilt position presets:
1.
Press ‘ESC’ to disable pan/tilt.
2. Navigate to
MENU → MANUAL → STORE POSITION.
T
he fixture will turn on the light automatically.
3.
Navigate to the position preset required.
4.
Manually point the head in the direction desired for the chosen position preset.
5. Store/overwrite the position preset by pressing ‘ENTER’. The fixture will confirm when briefly snapping to green and back to
white light.
6.
Repeat step 3-5 for other position presets
The internal pan/tilt position presets can be recalled and stored by DMX through the pan mode channel (download the DMX protocols
from www.sgmlight.com, available under the respective product).
These position presets are also used as position references for the internal programs.
Press ‘ENTER’ to start.
Proceed to the next position.
Adjust the position manually. Press ‘ENTER’ to confirm position.
Figure 15: Editing pan / tilt positions
Internal programs
The G-1 Beam features a selection of internal programs which can be used standalone without a controller.
There are seven internal programs ranging from simple continuous pan rotation and pan/tilt circles to sequential fade, with nine
programmable position presets. The table below shows the available programs.
Programming the position presets for the internal programs is performed by using the innovative SGM patented system, which lets
you determine the pan/tilt position by changing it directly by hand - see below “Pan / Tilt positions”.
These position presets can also be captured directly from DMX values sent from a controller.
Program 1,2,4,5, and 7 will use the pan/ tilt values programmed in position preset 1 of the internal position.
To run an internal program to go MENU → MANUAL → RUN PROGRAM.
To stop an active internal program go to MENU → MANUAL → STOP PROGRAM.
Program
Color
Movement
Position preset reference
1
White
Small circle slow
Stored position preset 1
2
White
Large circle slow
Stored position preset 1
3
White
Pan continuous and tilt swing
N/A
4
White
Large circle slow
Stored position preset 1
5
White
Pan continuous
Stored position preset 1 (for tilt only)
6
White
Sequential stored position preset fade
All
7
White
Static stored position preset 1
Stored position preset 1
8
N/A
N/A
N/A
Summary of Contents for G-1 BEAM
Page 1: ...USER MANUAL MOVING HEADS SERIES G 1 BEAM G 1 BEAM POI ...
Page 30: ...30 User Notes ...
Page 31: ...31 User Notes ...
