19
Labels and serial numbers
The G-1 Beam (POI) has labels mounted on the head and base units.
Standard and POI version with base unit
•
The primary label is mounted under the base unit.
•
A secondary label is mounted under the yoke, on the head unit.
Standard version without base unit and fixtures with
ceiling mount bracket
•
The primary label is mounted under the yoke, on the head unit.
Voltage on labels
The voltage printed on the main label (base unit
label) indicates the supply voltage (AC) for the power supply inside the base
unit. The voltage printed on the secondary label (head unit label) indicates the
voltage (DC) supplied from the base to the head unit.
For fixtures shipped without the base unit and fixtures shipped with the ceiling
mount bracket the voltage printed on the label indicates the supply voltage for
the external DC power supply.
Serial numbers
For standard and POI versions shipped with a base unit, the base and head unit will have the same serial number.
For fixtures shipped without the base unit and fixtures shipped with the ceiling mount bracket, the head unit will have an unique serial
number.
Connecting ceiling mount bracket to DC power and DMX
The wire harness on the ceiling
mount bracket has two cables, one
which supplies power, the other
which supplies DMX.
Connecting power
Use a 24 V DC power supply able
to deliver the sufficient amount of
power to the power cable of the
ceiling mount bracket wire harness.
Red = (+) Positive 24V DC
Black = (-) Negative 24V DC
Yellow/Green = Ground
Connecting DMX
DMX-in and -out is within the same
cable.
Red = DMX In / Data + White =
DMX In / Data - Yellow = DMX Out
/ Data + Black = DMX Out / Data -
Shield = Ground
NB! Remember to terminate the end of the
DMX link with a 120ohm resistor.
Model:
Voltage: 50Hz:
Voltage: 60Hz:
Current:
Power:
Fuse:
Serial No:
12x1234567890
Designed and manufactured by SGM A/S Denmark
DMX cable
Power (24V DC)
Red = (+) Positive 24v DC
Black = (-) Negative 24v DC
Shield/Blue = Ground
Black = DMX out / Data -
Yellow = DMX out / Data +
Red = DMX in / Data +
White = DMX in / Data -
Green/Yellow = Ground
Power Supply Ground/Chassis
Ex
ternal 24V DC
Po
w
er supply
Figure 20: Connecting ceiling mount bracket to DC and DMX
Figure 21: Labels and serial numbers
Summary of Contents for G-1 BEAM
Page 1: ...USER MANUAL MOVING HEADS SERIES G 1 BEAM G 1 BEAM POI ...
Page 30: ...30 User Notes ...
Page 31: ...31 User Notes ...
