SGM Technology for Lighting
GB
WIT070 V1.0-01NR
Idea Spot 250
2
KEEP THIS MANUAL FOR FUTURE NEEDS
For your own safety, please read this user manual carefully before installing the device.
CAUTION !
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing
EVERY PERSON INVOLVED WITH THE INSTALLATION, OPERATION AND MAINTENANCE OF THIS DEVICE
HAS TO:
- BE QUALIFIED,
- FOLLOW CAREFULLY THE INSTRUCTIONS OF THIS MANUAL.
INTRODUCTION:
Thank you for having chosen this professional moving head.
You will see you have acquired a powerful and versatile device.
Unpack the device. Inside the box you should find:
the fixture device,
a power cable,
an XLR connection cable,
a pair of Quick-lock omega holders,
a safety cable,
this manual.
Please check carefully that there is no damage caused by transportation. Should there be any, consult your
dealer and don’t install this device.
Features
Lamp: Philips MSD250/2
Control signal : standard DMX-512, 14 channels (16 bit) or 12 channels ( 8 bit)
Stand alone operation with Master/Slave function, sound activated via built in microphone.
Pan and tilt movement :
- 8 bit and 16 bit resolution for smooth and precise motion
- pan : 630° (optional : 540°) rotation , tilt : 265° rotation
- speed of pan/tilt movement adjustable
- scan position memory, auto reposition after unexpected movement
Focus: electronic focus
Strobe/shutter : high speed dual-blade shutter, 0-13Hz or random strobe
Dimmer : mechanical adjust 0%~100%
Colours:1 color wheel with 8 dichroic mirrors plus white, rainbow effect
Gobos: 2 gobo wheels
Rotation gobo wheel: 6 rotating gobos plus open, rotating speed adjustable, and gobo indexing
Fix gobo wheel: 7 fix gobos plus open, both 2 gobo wheels have different speed gobo shake and rainbow effect
Prism: 3- face speed adjustable prism rotates in two directions with 16 prism macro effect
Auto-program: 8 pre-built programs can be selected
Display: Can be changed 180° reverse to fit for different installation position.
Local and remote reset and lamp on/off.
Editable program: Edit and save the program to inside EEPROM via the control board or external controller,
up to 48 scenes can be saved and then can be run in Stand Alone or sound activated.
