SGM Technology for Lighting
GB
User’s Manual 1.00
Synthesis Wash 700
- 10 -
2
I
NSTALLATION
2.1
Equipment
During unpacking, make certain that all the necessary parts have been received and that the fixture
has not been damaged during transport. Should there be any problems, contact the local authorized
SGM distributor immediately.
Only the customer, in fact, can claim eventual damages in the fixture caused by the transportation.
SYNTHESIS WASH
WARRANTY BOOKLET
USER MANUAL
1 XLR 5 P MALE CONNECTOR
1 XLR 5 P FEMALE CONNECTOR
1 POWER-CON CONNECTOR
2 FAST-LOCK CLAMPS
2 ADDITIONAL LENS
1 SAFETY CABLE
1 ANTENNA WIRELESS
1 OSRAM LAMP
DO NOT DESPERD THE PACKING ELEMENTS.
THE PACKING ELEMENTS (PLASTIC BAGS, FOAM, NAILS, ETC.), MUST NEVER BE LEFT NEAR CHILDREN, AS
DANGEROUS. USE THE ORIGINAL PACKAGE IN CASE OF FIXTURE RETURN TO THE MANUFACTURER FOR REPAIR
OR MAINTENANCE SERVICE, IT HAS BEEN SPECIFICALLY MADE TO PROTECT THE FIXTURE DURING THE
TRANSPORT.
2.2
Power cable construction
Before installing the fixture check that the power supply cable AC is
disconnected.
1.
Wiring and connection work must be carried out by experienced qualified staff.
2.
Class one equipment must be earthed (grounded)
3.
Do not power Synthesis units with dimmers, as this could damage their on-board power supply
4.
Before connecting the unit, make certain that the mains power supply is the same as indicated
on the fixture’s ID plate
5.
The unit must be protected by a thermal/magnetic circuit-breaker
Symbol
Pin
EU
US
UK
L
Live
Brown
Yellow/Copper
Red
N
Neutral
Blue
Silver
Black
Ground
Yellow/Green
Green
Green
www.audiovias.com
Summary of Contents for Synthesis Wash 700
Page 47: ...www audiovias com...
