SGM Technology for Lighting
GB
User’s Manual 1.00
Synthesis Wash 700
- 20 -
3
M
ICRO
C
OMPUTER
C
ONTROL
3.1
Microcomputer “Control”
Synthesis is fitted with a microcomputer that enables the best fixture customization to the type of
installation. It is possible:
To assign the starting address
Receive data on lamp elapsed time and fixture operating time
Run diagnostic checks controlling the correct functionning of the fixture
Customization of some of the parameters
3.2
Longlife rechargeable buffer battery
Synthesis Microcomputer is also powered by an internal buffer battery which enables to use the
display functions even by not powered fixture. For powering the dispaly from the battery, press the
enter key for some seconds and the display will switch on automatically.
3.3
Navigating the menu
When it's switched on, the fixture runs a start-up reset procedure and the display indicates if there's
an input signal or not.
The 3 keys under the display are for selecting and using the various submenus which make up the
main menu.
UP/DOWN
keys: used to scroll the various items in the menu. In the selected menu, used to
change the required parameters.
ENTER
key: used to access to the selected menu and, once the necessary changes have been
made, is used to confirm them.
www.audiovias.com
Summary of Contents for Synthesis Wash 700
Page 47: ...www audiovias com...
