GB
SGM Technology for Lighting
Synthesis Wash 700
User’s Manual 1.00
- 21 -
3.4
Structure of the menu
Here below are indicated the options composing Synthesis menu.
Menu
Options
Description
ADDRESS XXX
Range 001-456 Fixture addressing
NORMAL
Normal PAN control of left to right PAN movement.
PAN MOVE
REVERSE
Inverted PAN movement control (from right to left).
PAN POS MIN
Range 000-526
Sets PAN movement start position. Default configuration = 000
degrees
PAN POS MAX
Range 004-530
Sets PAN movement stop position. Default configuration = 530
degrees
NORMAL
Normal control of TILT from up to down.
TILT MOVE
REVERSE
Inverted TILT movement control (from down to up).
TILT POS MIN
Range 000-246
Sets TILT movement start position. Default configuration = 000
degrees
TILT POS MAX
Range 004-250
Sets TILT movement stop position. Default configuration = 250
degrees
ON
Data regarding Pan controls Tilt and vice versa.
PAN TILT SWAP
OFF
Normal control of Pan and Tilt movement.
LAMP HOUR
-
Read only Menu. Stores lamp elapsed time. Can be reset.
LAMP STRIKE
-
Read only Menu. Stores the number of lamp strike. Can be
reset.
SCANNER HOUR
-
Read only Menu. Stores fixture operating time.
DMX
DMX signal selected.
Automatic selection of the signal.
SIGNAL
RS-232
RS-232 signal selected.
Automatic selection of the signal.
ON
Enables the DMX WIRELESS
WIRELESS
OFF
Disable the DMX WIRELESS.
WIRELESS
LOGOFF
SET
Disable the previous WIRELESS setting.
ON
Enables the wireless signal output on the DMX OUT port.
WIRELESS EXIT
OFF
Disables the wireless signal output on the DMX OUT port.
16 bit
bitEnable the Pan\Tilt movement resolution 16 bit.
PAN TILT RES
8 bit
bitEnable the Pan\Tilt movement resolution 8 bit.
HIGH RES
Enable Focus and Gobos index 16 bit.
OPERATING
LOW RES
Enable Focus and Gobos index 8 bit, reducing the channels total
number.
TRACKING
Traking operating mode. Mspeed channel is disabled.
SPEED CONTROL
VECTOR
Vector operating mode. Mspeed channel is enabled.
BOOST
Sets the lamp power at 100%
NORMAL
Sets the lamp power at 95%
LAMP POWER
SAVING
Sets the lamp power at 90%
ENABLE
Remote lamp ignition enabled.
LAMP CONTROL
DISABLE
Remote lamp ignition disabled.
ENABLE
Remote reset enabled.
RESET CONTROL
DISABLE
Remote reset disabled.
SPEED
100% - 92%
84% - 76%
Allows to slow maximum Pan and Tilt speed.
Default configuration = 100%
Fast
Optimises speed performance.
ACCELLERATION
Slow
Optimises smooth movement.
BRIGHTNESS
100-53-40-27
20-13-6-0(%)
Allows adjustment of display brightness.
Default configuration =40%
DISPLAY FLIP
-
Inverts display reading position. Used according to the position
in which the fixture is installed.
Range 8-600sec
It’s possible to set the number of second for which the fixture’s
last operating status must be held when there is no DMX signal.
DMX DELAY
UNL
Always maintains the fixture’s last operating status no matter
for how long there is no DMX signal.
SHUTTER CLOSE
SHUTTER
CLOSE=DS
Disables shutter closure in the event of pan/tilt loss of position.
www.audiovias.com
Summary of Contents for Synthesis Wash 700
Page 47: ...www audiovias com...
