SGM Technology for Lighting
GB
User’s Manual 1.00
Synthesis Wash 700
- 26 -
Pan/Tilt inversion
This function also allows to optimize Synthesis moving head in relation to
the operator’s position, in order to simplify all positioning procedure. When
SWAP is enabled (ON), this means that the lighting console sends the data
regarding Pan to the Tilts controls and vice versa.
To invert Pan and Tilt movement proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “PAN TILT SWAP” menu.
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the UP/DOWN keys to select which of the two available options is
required
5.
Press Enter to confirm.
Lamp elapsed time meter
Synthesis microcomputer stores various data, including those related to the
number of hours the lamp is lit (elapsed time). This is necessary to know in
advance when it’s almost time of relamping: lamp life is approximately 750
hours.
To see how many hours a lamp has been used, proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “Lamp Hour”menu. The lamp life
hours will be displayed automatically.
Resetting the lamp elapsed time meter
Each time a new lamp is fitted it’s possible to reset the meter indicating the
elapsed time in order to have the real elapsed time for the lamp about to be
fitted.
To reset the lamp elapsed time, proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations
2.
Use the UP/DOWN keys to find the “Lamp Hour”menu.
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the DOWN key to reset the meter.
5.
On the contrary, pressing the UP key restores the previous value.
6.
Press Enter to confirm.
PAN TILT SWAP=OFF
LAMP HOUR
LAMP HOUR
www.audiovias.com
Summary of Contents for Synthesis Wash 700
Page 47: ...www audiovias com...
